12 inch by 5 Yard Roll | Starcraft 3D Puff HTV

Starcraft 3D Puff Heat Transfer Vinyl

• Applies To: Cotton, Polyester, Cotton/Polyester Blends. Not suitable for us on nylon and other coated textiles.
• Heat Application, First Press:
  • Time: 10-12 seconds
  • Temperature: 285°F
  • Pressure: Medium to Firm
  • Peel: Warm
• Heat Application, Second Press: To maximize the 3D effect, remove protective (carrier, Parchment or non-stick sheet) and press a second time directly against the heat platen
  • Time: 5-7 seconds
  • Temperature: 285°F
  • Pressure: Medium to Firm
• Care Instructions: Wait 24 hours before washing. No harsh detergents or bleach. Tumble dry low heat.

NOTE: Hang to dry is recommended to increase the longevity of the garment and heat transfer vinyl. Drying with heat may also shrink the garment and cause puckering of the heat transfer vinyl so caution is advised.

It is the nature of this product for Puff results and texture to vary. It is a good idea to perform a test swatch.

Do not stretch StarCraft 3D PUFF as it is susceptible to cracks when stretched.